Mokungit 5M 30 Pixels/M WS2813 (Upgraded WS2812B) Individually Addressable 5050 RGB Dream Color Programmable LED Strip Pixel np
Light source: 5050 RGB LED
Led Qty: 30pcs per meter
Wave length (NM): R,650nm ; G,520nm ; B,460nm
The gray level: 256
Color: full color (24-bit )
Voltage: DC 5V
Waterproof: not-waterproof IP30
FPCB board color: white
5V: Power Voltage, connect to “+5V”
DO: Control data signal output
DI: Control data signal input
BO: Backup control data signal output
BI: Backup control data signal input
GND: Data &Power Grounding
1) The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.
2) The control circuit and the LED share the only power source.
3) Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.
4) Built-in power-on reset and brown-out reset circuits.
5) Port scanning frequency reaches to 2KHz/s.
6) Serial cascade interface. Data receiving and decoding depend on just one signal line.
7) Dual-signal wires version, signal break-point continuous transmission.
8) If the transmission distance between any two points is less than 3m, another circuit is not needed.
9) When the refresh rate is 30fps, cascade numbers are far more than 1024 points.
10) Data transmitting speed is up to 800Kbps.
5m 30 pixels/m WS2813 led strip (Power supply and controller are not included)
- Emitting Color: White PCB, Black PCB
- Item Type: Strip
- Power Source: DC
- Average Life (hrs): 35000
- Model Number: WS2813
- Certification: CE,RoHS,CCC
- Brand Name: MOKUNGIT
- LED Chip Model: SMD5050
- Strip type: SMD
- LED Chip Brand: Epistar
- Occasion: living room
- LEDs Number/M: 30 pcs/m
- Waterproof: Yes
- Color Temp(K): Q
- Power Generation: Light
- Specifications (light beads / m): 30
- Power Consumption (W/m): 0.3
- Voltage: 5V