600w on grid solar power inverter, DC input 10.8v~28v invertor

600w on grid solar power inverter, DC input 10.8v~28v invertor

$79.00 $71.10
Availability
In stock

  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 35cm x 26cm x 12cm (13.78in x 10.24in x 4.72in)

Wishlist
  • Tags: inverter parts, inverter dc arc welding machine, inverter pure sine wave, Cheap inverter parts, High Quality inverter dc arc welding machine, China inverter pure sine wave Suppliers.


600w on grid solar power inverter, DC input 10.8v~28v invertor
600w on grid solar power inverter
Grid-series models
TEG-600W
Recommend use solar panels
720W
DC Maximum Input Power
700W
DC Max. Voltage
Vpv DC30.2VDC
DC Vol. range
Vpv 10.5-28VDC
DC Maximum Input Current
40A
AC maximum Output Power
600watt
Maximum output power factor
0.99
DC Anti-voltage protection
Fuse
AC standard voltage range
(120V type: 90~130VAC) (230V type:190~260VAC)
AC frequency range
45Hz-63Hz
Output current total
harmonic distortion
THDIAC
Phase
Islanding protection
VAC; f AC
Output short circuit protection
Current-limiting
Show
LED display for power indication, voltage indication, and AC frequency indication
Standby Power
Night Power
Ambient temperature range
-25C~50C
Humidity
0~99%(Indoor Type Design)
Waterproof
Indoor Type Design
Electromagnetic Compatibility
EN50081.part1 EN50082.part1
Power System Disturbance
EN61000-3-2 EN62109
Network test
DIN VDE 1026
Certificate
CE
Net weight
1.3kg
G weight
1.8kg
Size (L x W x H)
21*16*5.3cm
Packing(L*W*H)CM
Inner: 30*21*12/pcs
Outer:43*32*38/10pcs
System Function
directly connected to the solar panels (do not need to connect the battery)
Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power,simply connect the solar panel to the grid inverters. Do not need to connect the battery.
AC 0 angle with high precision auto-detection
AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.
Synchronous High-frequency Modulation
In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.
Pure Sine Wave Output
Use SPWM directly to make pure sine wave output.
Automatic Sensing Function Solar Luminosity
Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Used more convenient.
Power Automatically Locked (APL)
In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.
Maximum Power Point Tracking (MPPT)
Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes.
Automatically Adapt To Different Load Power Factor
Adapt to any of the power load.
Constant Current, Constant Power
This product is constant current, constant output power, without any overload, over-current phenomenon.
Automatically Shut Down When The Power Output Of a Fault
When the city power system is in failure, the inverter will automatically turn off the output.
Current Limit Protection
Current limit
Stack Multiple Machines
Multiple small power inverters in parallel can achieve large output power.
High-Frequency High Conversion Rate
Adapt high frequency converter, the output more efficient.
User Guide
1. Installation Connection
1. Red terminal: Connect DC positive, black terminal: Connect DC negative. Show in Figure 1.
2. AC socket: Connect to the mains. Put the side of the AC cord which has holes into the inverter with 3 foot outlet and the other side of the AC cord to home 3PIN AC outlet. Show in Figure 2.
3. Switch: Connect the connections in right way, then turn on the switch. The inverter starts to work.
3. Stack using
In order to achieve higher power use requirements, this product can be stacked, such as: 4 grid inverter1000W stacking can achieve 4000W.And the number of the stacking is unlimited. Used as shown in Figure 6:
Figure 6
T hanks for visit our store and order our products! When you make the order, please note the following matter:
1. Please leave us exact input voltage ( DC 12V or 24V)and output voltage(AC100V or 110V or 120V or 220V or 230V or 240V), frequency ( 50Hz or 60Hz), and outlet Plug(A or B or C or D) so that we can send you the perfect products.
2. Please leave your clear delivery information, special for phone number and contact name.

  • Output Type: Single
  • is_customized: Yes
  • Type: DC/AC Inverters
  • Size: 21*16*5.3cm
  • Input Voltage: 10.8-28V
  • Output Current: 0-6A
  • Output Voltage: 90-130V/190-260V
  • Output Frequency: 50HZ/60HZ
  • Weight: 1.3KG
  • Model Number: TEG-600W
  • Output Power: 0-600W
  • DC maximum voltage: VpvDC 30.2VDC
  • Anti-voltage protection: Fuse
  • Islanding protection: VAC;f AC
  • Place of Origin: Shanghai, China (Mainland)
  • color: silver
  • max ac output power: 600w on grid solar power inverter
  • dc input voltage: 10.8-28v
  • warranty: 1 year
  • certifications: CE&ROHS
  • Product type: DC input 10.8v~28v invertor